SONAX 02463000 PROFILINE CutMax 1 l

Highly effective grinding paste for rotary polishing machines. Ideal for heavily weathered, scratched or sanded paint layers. Removes scratches and inclusions from refinished paintwork, smoothes scuffs and removes paint spray mist. Removes sanding marks from sandpaper P1000 and finer. Low-dust in use thanks to the innovative Low Dust Technology. Sanding performance: 6 Gloss level: 4

Product properties

• Grinding level 6, removes marks from sandpaper P1000
• Low matting with enormous removal at the same time
• Silicone-free < /li>
• Low-dust formulation
• contains extremely hard aluminum oxide
• large processing window, stays open for a long time

Product advantages

• silicone-free
• low dust, hardly any rework
• short polishing times
• odorless
• good machine control

Application

Shake the bottle before use. Put some product on the SONAX SchaumPad hard (04931000) or the SONAX LambswoolPad (04931410) and polish at low speed and increased pressure for approx. 10 seconds. The machine can become slightly jammed if there are deep scratches. Then polish with low pressure for approx. 20 seconds, laying the sponge flat. Then add new product to the pad and perform another polishing pass. The times given refer to average hard paint and an area to be polished of approx. 50 x 50 cm. Remove polishing agent residues with a SONAX ultra-fine microfiber cloth (04507000). Then finish polish with SONAX PROFILINE PerfectFinish (02243000). PLEASE NOTE: Do not overheat the polishing area. Clean polishing pads regularly and never use different polishing agents on one pad. Protect from frost. Keep out of reach of children. Safety data sheet available on request.

Areas of application

For vehicle upgrading and paint shops with rotary polishing machines.


Safety data sheet