Antifreeze tester for car wash systems - Measuring device with plastic cylinder - Glass hydrometer - Instructions for use in 20 languages ​​Areas of application: - Checks the antifreeze in vehicle windshield washer systems - For isopropanol / methanol water mixtures corresponding to commercially available antifreeze for windshield washer systems Application: - Frost protection display green / red range above - 20 °C = green area below - 20 °C = red area The antifreezes from different suppliers differ in density and frost resistance. The measuring device can therefore only provide guidance. When dosing, it is important to ensure that it is in the green range as much as possible. - Density scale The density scale with additional density values ​​allows you to create a reference value for your antifreeze. Data: - Measuring range: 0 to . 40 .C graduation: 0.005 g/ml - suction volume: 18 ml - total length of the device: 255 mm - suction hose length: 200 mm - packaging size: 46 x 48 x 260 mm - weight: 112 g

ATO fuse range contents 109 fuses

Manufacturer Restriction ATO Current [A] 10 Current [A] 15 Current [A] 20 Current [A] 25 Current [A] 30 Current [A] 5 Current [A] 7.5

Antifreeze tester in traditional design - Glass cylinder - Glass hydrometer - Thermometer - Correction table - Determination of the antifreeze at all temperatures of the cooling water by taking the temperature into account using the built-in correction table - Instructions for use in 20 languages ​​in the packaging Areas of application: - For ethylene glycol - (Ethanediol) - Water mixtures for cooling circuits in cars, trucks, etc. Data: - Measuring range (20 C.): . 2 to . 41 C. - Temperature display: 2 to 74 C. - Suction volume: 40 ml - Total length of the device: 360 mm - Suction hose length: 200 mm - Packaging size: 52 x 52 x 374 mm - Weight: 180 g

Antifreeze tester Suitable for testing all ethylene glycol antifreezes Rod shape High measuring accuracy Glycol value easy to read

Fuse version: Standard flat plug fuse Voltage up to [V]: 32 Current strength from [A]: 3 Current strength up to [A]: 30 DIN/ISO: 72581/3C, SAE J 1284, 8820-3, JASO D612 Width [mm ]: 19.05 Height [mm]: 18.54 Depth [mm]: 5 Packaging type: Blister pack

HERTH+BUSS fuse set Fuse version: Glass fuse Diameter [mm]: 6.3 Length [mm]: 32 Current strength from [A]: 5 Current strength up to [A]: 30 Voltage up to [V]: 250 Quantity: 5 Packaging type: Blister pack SVHC: No SVHC substances present!

Technically modern design, proven many times and worldwide - Simple, quick and accurate measurement - Stable plastic housing - Hanging loop - Pendulum pointer - No vertical positioning of the device required - Automatic temperature compensation - Closure by rotary valve - No dripping, no drawing of air - Very long Duration of use and measurement accuracy thanks to the storage of the measuring disk and the pendulum pointer using a steel axle. This means that there is little influence due to coolant contamination - instructions for use on the device and included in 20 languages ​​Areas of application: For ethylene glycol - (ethanediol) - water mixtures for cooling circuits in cars, trucks, etc. Heating systems Solar systems Data: Measuring range: -5 to -40°C Suction volume: 52ml total length of the device: 155mm Suction hose length: 200mm Packaging size: 126x182x41mm Weight: 130g

Manufacturer restriction: MINI Current [A]: 10 A Current [A]: 15 A Current [A]: 20 A Current [A]: 30 A Current [A]: 4 A Current [A]: 5 A Quantity unit: Set of fuse version: mini blade fuse

Technical data Fuse version Mini flat plug fuse Current strength from [A] 5 A Current strength up to [A] 30 A Voltage up to [V] 32 V Width [mm] 10.9 mm Height [mm] 16.3 mm Depth [mm] 3.8 mm DIN/ISO 72581/3F Container type Blister pack Surface silver-plated DIN/ISO 8820-3 DIN/ISO JASO D612 DIN/ISO SAE J2077

Ullrich Exclusiv Design Original Accessories The LED adapters from Ullrich Exclusiv Design were provided with original Porsche plugs and are inserted plug & play into the existing wiring harness. - Simple plug & play installation - 100% perfect fit thanks to the original Porsche plug - No complicated soldering or anything similar, the adapters are simply plugged into the existing wiring harness. - no coding required.

Length1/Length2 [mm] 5x20(2.5A) Length1/Length2 [mm] 6x25 Current [A] 16 Current [A] 2.5 Current [A] 25 Current [A] 5 Current [A] 8< br>

Application: Safe protection against damage to the door edges Size (LxW): approx. 200 x 20 cm Thickness: approx. 0.4 cm Material: PVEA Perfect for wall surfaces that are subjected to particularly frequent and heavy use High damping properties, protects your vehicle from dents and scratches Easy to install thanks to self-adhesive backing Extremely high abrasion resistance Can be cut to size Lightweight and elastic