Liqui Moly original product Product description: Latest generation automatic transmission oil based on HC synthesis base oils combined with the most modern , powerful additives. The excellent composition of various base oil and additive components ensures optimal aging stability, excellent wear protection and favorable friction behavior. Meets the requirements of numerous aggregate and vehicle manufacturers and ensures that the aggregates function properly even under the most severe operating conditions and large temperature fluctuations. Also suitable for extended oil change intervals. Properties: - highest thermal stability - excellent corrosion protection - enables a wide range of applications - good viscosity-temperature behavior - very good Low temperature properties - high chemical resistance - excellent wear protection - optimal aging stability - excellent friction behavior Specifications / Approvals: • Allison C4 • Dexron III H • Ford Mercon V • Honda ATF Z1 (except CVT) • Hyundai SP-II • Hyundai SP-III • JASO 1-A < br> • Kia SP-II • Kia SP-III • Mazda ATF M-III • Mazda ATF MV • Mitsubishi SP-II • Mitsubishi SPIII • Nissan AT-Matic D Fluid • Nissan AT-Matic J Fluid • Nissan AT-Matic K Fluid • Toyota Type T-II • Toyota Type T-IV < b>LIQUI MOLY also recommends this product for vehicles or units for which the following specifications or original spare part numbers are required: • Allison TES 295 • BMW 7045 E • BMW 8072 B < br> • BMW LA 2634 • BMW LT 71141 • Caterpillar TO-2 • Chrysler ATF +3 • Chrysler ATF +4 • Daimler NAG-1 • JWS 3309 (Aisin Warner) • MAN 339 type V1 • MAN 339 type Z1 • MAN 339 type Z2 • MB 236.2 • MB 236.5 • MB 236.6 • MB 236.7 • MB 236.9 • MB 236.10 • MB 236.11 • Subaru ATF • Voith H55.6335. XX (G 607) • Volvo 97340 • Volvo 97341 • VW G 052 162 • VW G 052 990 • VW G 055 025 • ZF TE-ML 02F • ZF TE-ML 03D • ZF TE-ML 04D • ZF TE-ML 05L • ZF TE-ML 09 • ZF TEML 11A • ZF TE- ML 11B • ZF TE-ML 14A • ZF TE-ML 14B • ZF TE-ML 17C Typical product data: Density at 15°C ==> 0.850 g/cm³ DIN 51757 Viscosity at 40°C ==> 36.4 mm²/s ASTM D 7042-04 Viscosity at 100°C ==> 6.9 mm² /s ASTM D 7042-04 Viscosity at -40°C (Brookfield) ==> 20000 ASTM D 2983-09 Viscosity index ==> 150 DIN ISO 2909 Pour point ==> -48 °C DIN ISO 3016 Flash point ==> 230 °C DIN ISO 2592 Color / appearance ==> red Area of ​​application: For automatic transmissions , manual transmissions, steering systems, hydraulics and power take-offs both in passenger cars and commercial vehicles as well as in industrial applications. Universally applicable in European, American and Asian vehicles. Use in accordance with the specified specifications of the unit or vehicle manufacturer. Application: The specifications and regulations of the aggregate or. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. 9 mm²/s ASTM D 7042-04 Viscosity at -40°C (Brookfield) ==> 20000 ASTM D 2983-09 Viscosity index ==> 150 DIN ISO 2909 Pour point ==> -48 °C DIN ISO 3016 Flash point ==> 230 °C DIN ISO 2592 Color / appearance ==> red Area of ​​application: For automatic transmissions, manual transmissions, steering systems, hydraulics and power take-offs in both passenger cars and commercial vehicles as well as in industrial applications. Universally applicable in European, American and Asian vehicles. Use in accordance with the specified specifications of the unit or vehicle manufacturer. Application: The specifications and regulations of the aggregate or. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. 9 mm²/s ASTM D 7042-04 Viscosity at -40°C (Brookfield) ==> 20000 ASTM D 2983-09 Viscosity index ==> 150 DIN ISO 2909 Pour point ==> -48 °C DIN ISO 3016 Flash point ==> 230 °C DIN ISO 2592 Color / appearance ==> red Area of ​​application: For automatic transmissions, manual transmissions, steering systems, hydraulics and power take-offs in both passenger cars and commercial vehicles as well as in industrial applications. Universally applicable in European, American and Asian vehicles. Use in accordance with the specified specifications of the unit or vehicle manufacturer. Application: The specifications and regulations of the aggregate or. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. – Combustion engine oils – Gear oils – Oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. – Combustion engine oils – Gear oils – Oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you.

Liqui Moly Original Product Product description: Latest generation automatic transmission oil based on HC synthesis base oils combined with the most modern, high-performance additives . The excellent composition of various base oil and additive components ensures optimal aging stability, excellent wear protection and favorable friction behavior. Meets the requirements of numerous aggregate and vehicle manufacturers and ensures that the aggregates function properly even under the most severe operating conditions and large temperature fluctuations. Also suitable for extended oil change intervals. Properties: - highest thermal stability - excellent corrosion protection - enables a wide range of applications - good viscosity-temperature behavior - very good low temperature properties - high chemical resistance - excellent wear protection - optimal aging stability - excellent friction behavior Specifications / Approvals: • Allison C4 • Dexron III H • Ford Mercon V • Honda ATF Z1 (except CVT) • Hyundai SP-II • Hyundai SP-III • JASO 1-A • Kia SP- II • Kia SP-III • Mazda ATF M-III • Mazda ATF MV • Mitsubishi SP-II • Mitsubishi SPIII • Nissan AT-Matic D Fluid < br> • Nissan AT-Matic J Fluid • Nissan AT-Matic K Fluid • Toyota Type T-II • Toyota Type T-IV LIQUI MOLY also recommends this product for Vehicles or units for which the following specifications or original spare part numbers are required: • Allison TES 295 • BMW 7045 E • BMW 8072 B • BMW LA 2634 • BMW LT 71141 • Caterpillar TO-2 • Chrysler ATF +3 • Chrysler ATF +4 • Daimler NAG-1 • JWS 3309 (Aisin Warner) • MAN 339 type V1 • MAN 339 type Z1 • MAN 339 type Z2 • MB 236.2 • MB 236.5 • MB 236.6 • MB 236.7 • MB 236.9 • MB 236.10 • MB 236.11 • Subaru ATF • Voith H55.6335.XX (G 607) • Volvo 97340 • Volvo 97341 • VW G 052 162 • VW G 052 990 • VW G 055 025 • ZF TE-ML 02F • ZF TE-ML 03D • ZF TE-ML 04D • ZF TE-ML 05L • ZF TE-ML 09 • ZF TEML 11A • ZF TE-ML 11B • ZF TE-ML 14A • ZF TE-ML 14B • ZF TE-ML 17C Typical product data: Density at 15°C ==> 0. 850 g/cm³ DIN 51757 Viscosity at 40°C ==> 36.4 mm²/s ASTM D 7042-04 Viscosity at 100°C ==> 6.9 mm²/s ASTM D 7042-04 Viscosity at -40°C (Brookfield) ==> 20000 ASTM D 2983-09 Viscosity index ==> 150 DIN ISO 2909 Pour point ==> -48 °C DIN ISO 3016 Flash point ==> 230 °C DIN ISO 2592 Color / Appearance ==> red Area of ​​application: For automatic transmissions, manual transmissions, steering systems, hydraulics and power take-offs in both Car and commercial vehicle sectors as well as in industrial applications. Universally applicable in European, American and Asian vehicles. Use in accordance with the specified specifications of the unit or vehicle manufacturer. Application: The specifications and regulations of the aggregate or. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you. Vehicle manufacturers must be taken into account. Top Tec ATF 1200 can also be used to refill systems that use conventional ATF oils. However, optimal effectiveness is only possible when used unmixed. Notes on waste oil disposal: According to the waste oil regulations, we are obliged to take back the following used oils free of charge: – combustion engine oils – gear oils – oil filters and oil-containing waste that regularly arises when changing the oil. The amount of used oil that you can return to us is limited to the internal combustion engine and/or transmission oil given to you. You can drop off the oils at our company location at any time during our opening hours. Alternatively, you can send us the used oil - if you cover the shipping costs. Please note that special transport conditions may apply for used oil. If you are a commercial end user, we would like to point out that we can use third parties to fulfill our acceptance obligations to you.