Charge status indicator Comfort indicator Cigarette lighter & on-board socket Battery charge indicator and connection in one Batteries need a sufficient charge level to ensure starting reliability and a long service life. Determining the charging status and making it visible to the user at any time is the task of the new Comfort Indicator charging status displays from CTEK. A traffic light function shows simply and immediately how well the battery is charged. The fact that you can simply connect any XS800, XC800, XS 3600, XS 4003, XS 7000, XS 0.8, to trim optimal charging status. The traffic light is green for charge levels >12.85 volts and turns red for charge levels <12.4 V. This takes into account the fact that batteries below 12.4 V sulfate. Equipment: 500 mm cable · 15 A fuse. Technical data: Connection (car): cigarette lighter (21 mm inner Ø) · Operating voltage (LOV): 12 V · Contents: 1 piece · Cable length: 0.50 m · Suitable for (chargers): CTEK Zafir 90,CTEK XS800,CTEK XS 7000,CTEK XS 3600,CTEK XS 0.8,CTEK XC800,CTEK ,CTEK Multi XS 4003,CTEK Lithium
Comfort Indicator Eyelet M8 with ring cable lug "charging light" A practical combination of quick connector and indicator for batteries that are difficult to reach. The display instrument shows the battery charge status simply and clearly. The ring eyelet terminals are mounted on the battery, making connection very easy without the operator actually having to get to the battery.
Comfort Indicator Eyelet M8 with ring cable lug "charging light" A practical combination of quick connector and indicator for batteries that are difficult to reach. The display instrument shows the battery charge status simply and clearly. The ring eyelet terminals are mounted on the battery, making connection very easy without the operator actually having to get to the battery.
Comfort Indicator Eyelet M8 with ring cable lug "charging light" A practical combination of quick connector and indicator for batteries that are difficult to reach. The display instrument shows the battery charge status simply and clearly. The ring eyelet terminals are mounted on the battery, making connection very easy without the operator actually having to get to the battery.
CTEK charger MXS 10 EU, 56-708, 7350009567084 The MXS 10 is a charger with the latest technology. It is ideal for professional use in workshops, caravans, motorhomes, boats and vehicles. The MXS 10 solves a variety of battery problems. It offers a number of features such as: B. a battery diagnostic that shows whether the battery can accept and hold a charge, a special reconditioning function that restores deeply discharged batteries with acid layer formation, a unique maintenance charging function and a temperature sensor for optimized, weather-independent charging. It also has a power supply function that allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process. The MXS 10 is a fully automatic 8-stage charger with a charging current of 10A for 12V batteries from 20 - 200Ah and for maintenance charging of up to 300Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronic systems, is spark-proof, reverse polarity and short-circuit proof
CTEK charger MXS 3.8 EU, 56-309, 7350009563093 The MXS 3.8 is a highly developed, microprocessor-controlled battery charger with patented float/pulse trickle charging for batteries from 1.2 Ah up to 85 Ah. The MXS 3.8 solves a number of battery problems and is an ideal charger for everyday use. Features of the MXS3.8 include battery health diagnostics to determine whether the device can receive and hold charge, a patented automatic desulphation program, and a special “Snowflake” mode for optimal charging on cold winter days. The patented Float/Pulse trickle charge makes the MXS 3.8 ideal for long-term maintenance. The entire process of battery testing, charging and maintenance can be easily tracked on the clear LED display. The MXS 3.8 is a fully automatic 12 V charger based on the “connect and forget” principle with 7 charging levels; it offers selectable programs of 0.8 A and 3.8 A. The 3.8 A program has a “snowflake” mode. Wide charging range for all lead-acid battery types from 1.2 Ah up to 80 Ah with additional trickle charging capacity up to 130 Ah. Splash-proof and dust-proof (IP65). The MXS 3.8 is safe and easy to use, spark-free, reverse polarity protected and short circuit proof, and protects the vehicle electronics.
The MXS 5.0 has automatic temperature compensation to achieve the best charging performance even under extreme conditions. The MXS 5.0 is an advanced microprocessor-controlled battery charger that offers unrivaled performance when charging lead-acid batteries between 1.2 and 110 Ah. It has integrated automatic temperature compensation to achieve the best charging performance even under the most extreme conditions. The MXS 5.0 also features battery diagnostics that determine whether the battery can accept and hold charge, a patented automatic desulphation program, an AGM option to maximize the life of most start/stop batteries, and a special recond mode to recondition deeply discharged ones Batteries. The MXS 5.0 uses CTEK's patented float/pulse system. This is the most efficient trickle charge mode when a battery is left connected to the charger for a long period of time. Features Automatic temperature compensation that guarantees ideal charging performance even under extreme operations · 8-stage fully automatic charging characteristic IUoUp without voltage peaks · Splash-proof and dust-proof (IP65) · Quick connection · Sulfate treatment · Battery test and diagnosis · Absorption 14.4 / 14.7 / 15, 8 V · Reverse current 1.3 mA approx. 1 A/month when the device is connected to the battery but not to the mains
CTEK battery charger "MXS 5.0 Test & Charge", charging current 0.8 / 5A, suitable for standard, AGM and gel batteries, battery capacity 1.2Ah - 110Ah (charging), 1.2Ah - 160Ah (maintaining), automatic switch-off , freshness function, desulphation mode, crocodile clips, plug-in contact cable for built-in batteries. Combination of highly developed microprocessor-controlled battery charger and battery and alternator tester, offers the best possible testing, charging and trickle charging., charging voltage 12 volts
CTEK universal charger MXS 7.0 EU, 56-731, 7350009567312 The MXS 7.0 is the perfect 12V universal charger. It is ideal for charging larger batteries for caravans, motorhomes, boats and vehicles. These types of vehicles often require charging features that can solve a variety of battery problems. The MXS 7.0 offers a number of features such as: B. a battery diagnostic that shows whether the battery can accept and hold a charge, a special reconditioning function that restores deeply discharged batteries with acid layer formation, a unique maintenance charging function, a mode for optimized charging on cold winter days and the ability to charge demanding AGM batteries (i.e Optima). It also has a power supply function that allows the battery to be disconnected from the vehicle without losing important configurations. The MXS 7.0 is a fully automatic 8-stage charger with a charging current of 7A for 12V batteries from 14 - 150Ah and for maintenance charging of up to 225Ah. The charger has protection class IP65 (protected against dust and splash water), was built to protect vehicle electronic systems, is spark-proof, reverse polarity and short-circuit proof
Charger XS 0.8 12V CTEK Max 0.8A 56-707 The automatic charger for smaller lead battery systems, e.g. B. in motorcycles, mobile work equipment or for wintering. The XS 0.8 has a fully automatic 6-stage charging system with IUoUp characteristic, which also has a pulse charging function to revive deeply discharged/partially damaged batteries. With its automatic function, it is also ideal for storing unused batteries over the winter. For 12 V on-board electrical systems/batteries, charging current max. 0.8 A 6-stage automatic charging, can be controlled directly via LEDs Electronics-safe, can also be used in vehicles with a high proportion of electronics Pulse charging function for deeply discharged/partially damaged batteries For batteries from 1.2 to 32 Ah (Charging) Trickle charging up to 100 Ah For all lead battery technologies (wet/open, lead gel, AGM, lead-calcium) Splash-proof and dust-proof, IP65
Cigarette lighter socket / Comfort Connect For connecting 12 V devices to batteries 100 mm cable with fuse Makes the battery available as a power source for additional electronic equipment such as navigation systems, mobile phones and small heaters. The adapter is connected using the charging clamps or quick connectors included with the CTEK Multi chargers. These are included in the following chargers: XS800, XC800, XS 3600, XS 3.8, XS 4003, XS 5.0, XS 7000, XS 0.8, Technical data: Contents: 1 piece · Suitable for (chargers): CTEK Zafir 90,CTEK XS800,CTEK XS 7000,CTEK XS 3600,CTEK XS 0.8,CTEK XC800,CTEK 7.0,CTEK MXS 5.0 Test,CTEK MXS 5.0 Polar,CTEK MXS 5.0,CTEK MXS 3.8,CTEK MXS 3.6,CTEK Multi XS 4003,CTEK Lithium
Accessories for the CTEK Multi chargers: XS800, XC800, XS 3600, XS 3.8, XS 4003, XS 5.0, XS 7000, The quick-contact cable is firmly connected to the battery using ring cable lugs and remains in the engine compartment while driving. Ideal for battery poles that are difficult to access and for retrofitting other vehicles.
This CTEK quick contact cable COMFORT M10 with ring eyelet terminals is a practical quick connector for batteries that are difficult to reach or are installed hidden. The battery eyelet connector has a cable length of 40 cm. The M8 (8.4mm) eyelet terminals connect effortlessly to the battery without the need for actually reaching the battery. The eyelets are available in three different sizes for different battery connection sizes
€17.00*
This website uses cookies to ensure the best experience possible. More information...
